We can split the parts for CNC machining and use adhesives to assemble them subsequently.

No, we don’t offer post-machining for parts those we didn’t manufacture.

Yes. However, we need to know what material should be to ensure if we can machine it.

You can expect CNC-machined parts as milled or turned, without any obvious scratches or signs of oxidation if you don’t need any other after treatment on them.

Yes, Premium Parts can install pins and threaded inserts in our facility.

No, we can’t machine wood.

Yes, we can machine ceramic.

You can communicate your design needs to us with our “request a quote” form or add a note in your drawing files before upload.

At Premium Parts, we use DIN ISO 2768 (fine class) for metal machining. While for plastics, we use medium class as our standard.

I. Avoid creating designs with sharp internal corners and use inner radii at the corners of your design.
II. Where possible, design all parts with standard sizes. For instance, it is more affordable and cost-effective to make parts that measure 10m in height than 10.5m, as the latter requires human intervention.
III. Try to design parts for CNC prototyping without a draft.
IV. Simplify part design to reduce the angles and sides from machining. With more angles, axes, and sides for part machining, the cost would be higher.